Ghost Immobiliser Installation
Install a ghost immobiliser on your vehicle to protect it from thieves. Our TASSA-verified system protects against hacking, key cloning and bypassing the vehicle immobiliser.
The system is hidden inside the wiring loom of your vehicle It is inaccessible to anyone looking. It works by generating pin code push sequences that are activated by buttons already present on the steering wheel, door cards and centre console.
No circuit cuts
A car is a prized item that takes hours of work to acquire, so it's understandable why car owners would want to secure their vehicle from theft. However, traditional security devices like wheel locks and alarms can easily be cut off or bypassed by thieves. Ghost immobilisers are extremely effective solution that works in a quiet manner and isn't easily detected by modern thieves.
A ghost immobiliser or a hidden device is a device that connects to the data network of your vehicle's CAN to shut off the engine. It does this without the use of key fobs or radio frequencies. It communicates with the ECU of your vehicle via buttons on the steering wheel, dash and door panels. This generates a unique pincode that is only known by you. The code can be altered at any time and can have up to 20 digits based on your preference. It also comes with an emergency code that you can use in case you forget your PIN.
The ghost immobiliser can also be useful to prevent a relay box in your home from transmitting the signal from your car key, which will unlock the doors and start your vehicle. It can also block sophisticated methods to steal your vehicle, including OBD port hacking. The device is small and weatherproof, so it's hard to spot and even harder to tamper with.
The ghost immobiliser also has an advantage: it is able to be fitted to your vehicle without leaving permanent marks. This makes it perfect for those who intend to sell their vehicle in the near future. It's also quicker and simpler to install as than a factory-fitted unit.
The Autowatch Ghost is a groundbreaking next-generation device that blocks contactless stolen cars by connecting to the vehicle's CAN data network and utilizing existing buttons to generate a unique PIN code. This is a stealthy device that can be put in without wires being cut and doesn't require any additional key fobs. It is also connected to the vehicle's original ECU, preventing thieves from bypassing it by using new keys or replacing the ECU with the use of a "relay". This system is TASSA certified and is connected to an International Security Register, allowing owners peace of mind knowing that their vehicles are secure from theft.
No RF scanning
You'll want to secure your vehicle from theft if you have spent a lot of money and time customizing it. Installing an immobiliser is one of the best ways to prevent theft. It will stop your vehicle from beginning until you enter a unique code. You can create a 20-digit pin using the buttons on your dashboard and steering wheel. This will ensure that only you have the right to drive your vehicle. It is also possible to create a service and valet mode that will allow you to start your car for a short period without entering the PIN code. This will allow the technician to work on your vehicle without you being present. This feature is great for people who want to reduce time and simplify their lives.
A ghost immobiliser is a next generation device that connects to your vehicle's CAN data network, and uses the buttons on the steering wheel and dashboard to program a personal PIN code. It is designed to blend into, as it does not emit any sound or LED indicator. It can be put in anywhere on your vehicle without impacting the appearance of your vehicle.
This stealthy gadget has been approved by TASSA and could lower your insurance costs. It comes with a tracking feature that will locate your vehicle even if it's gone missing. This is especially useful if you own a rare expensive vehicle that you've spent many hours customizing.
The Autowatch Ghost can be used in conjunction with an iPhone application to allow you to remotely start your vehicle if you forget your PIN or are not able to enter the vehicle due to a reason. This feature is ideal for those who need to take your kids to school or run errands, but don't want someone else driving your vehicle. It is also helpful if you need to take your vehicle in for servicing or repair.
Another advantage of the Ghost is that it does not transmit or detect radio frequency signals, making it undetectable to thieves using RF scanning or code grabbing technology. It also has the ability to protect your car from key copying and ECU swapping, which are typical methods of theft from cars.
There is no key to cloning
Ghost immobilisers can be a great way to protect expensive cars and stop key copying. They work by preventing your car from starting unless an additional PIN code is entered in conjunction with the standard key fob. This makes it difficult for thieves to rob your vehicle and can also deter them from doing it in the first place. This is a particularly good idea if you've spent lots of time and money making your vehicle unique or have a unique or expensive model.
The immobilisers are connected to the vehicle's CAN network and are completely hidden, meaning their presence isn't obvious. It is also difficult to identify by using radio frequency scanning technology or code grabbing. This means that a burglar must spend much longer in order to take your vehicle.
To get around the system, a thief must be aware of the unique pin code and the location of the Ghost. However, the pin code will be specific to you and may be changed as many times as you like. The pin you select is easy to remember but mathematically difficult for anyone else to decipher. The engineer will also have provided an emergency PIN code in case you forget your pin.
The Ghost CAN Bus immobiliser can be easily mounted anywhere on your vehicle. It works with all vehicles and fully customisable to match the appearance of your car. It is also very easy to use and cost-effective. The device can be transferred to a different vehicle, as long as it is compatible with the new vehicle.
The CAN bus is compatible with other security features. It can, for example, detect damage to the vehicle and alert the owner. It could also shut down the engine in the event that the car has been damaged. It also helps protect your vehicle from hacking and key cloning. It also detects vibrations and contact with the vehicle. In addition, it can notify the owner that the vehicle has been moved.
No OBD port hacking
Ghost uses an immobiliser that is hidden and connected to your vehicle's CAN data network that prevents thieves from hacking into your car to disable the alarm, deactivate the key fob, and then code new keys. This technology is a step up over the old methods used by thieves to steal vehicles in the past. The CAN data network also means that the system won't be affected by disconnecting or replacing your battery.
The Autowatch Ghost, the first non-detectable immobiliser for CAN bus aftermarkets worldwide, safeguards against key-cloning, hacking and replica car theft. It works without LED indications or key fobs, instead leveraging the buttons on your steering wheel or centre console, as well as the door panels to allow you to create a unique PIN code sequence (up to 20 button presses) that must be entered before you can drive your car away.
Modern thieves utilize diagnostics to identify circuit breakages in your vehicle. They can bypass immobilisers which require a lot wiring or are integrated into the wiring. ghost 2 immobiliser fitting near me is weatherproof and does not require any additional wiring. It is not able to be identified by diagnostic tools that are professional. It can even be fitted on vehicles that are fitted with anti-theft equipment.
A Ghost immobiliser comes with a major benefit: your vehicle can only start by someone who knows your PIN and physically has access to your vehicle. This is a big advantage over traditional security systems which can be bypassed with simple cable tampering, a screwdriver or a universal remote controller.
If you forget your PIN, you can reset it easily using the emergency PIN reset function on a mobile device or computer. This is helpful if you want to start your vehicle after having left it in a garage or using the valet parking service.
The Autowatch Ghost 2 is the latest version of the product and is approved for insurance by TASSA when installed by one of our authorised installers. It features a QR fingerprint system to identify individual parts, which allows for the return of stolen items if they are discovered. It can also be switched to'service mode', which allows the engine to start when your car is in a garage, or if you have valet parking, but you will need to enter your PIN code again to exit the car.